


A crop at 200%. Softness alone looks slightly out of focus; with the edge effects of development, it looks like film.
Scattered light, sharpened edges.
The emulsion scatters light a few micrometres, so the finest detail fades.
At the same time, developing grains release chemicals that hold back development next to them. Edges between light and dark get crisper, and colours separate more.
Fitted to the stock makers' curves.
Softness is fitted to the stock makers' published sharpness curves, within about 10% at 40 and 60 cycles per millimetre, and scaled to the real size of the frame, so HD and 4K look the same.
Edge effects follow the measured chemistry, about 20 micrometres wide.
How to use it
Leave it at 1
1 is the camera negative as measured. It's the honest setting.
Older lenses
Lower softness if your lens is already soft; the film adds to it.
Edges, not sharpening
Edge Effects is not a sharpen. It changes colour separation, too.
The controls
| Control | Range | Default |
|---|---|---|
| Film SoftnessThe camera negative cannot hold detail as fine as a digital sensor. 1 = the negative as Kodak's published sharpness curves show it (about 3.9 micrometres for 500T). Each stock has its own value (50D sharpest, 500T softest). At HD the effect is subtle; for the softer look of a cinema print, choose Finish: Release print. 0 = off. | 0 to 4 | 1 |
| Edge EffectsFilm's own chemical edge sharpening (DIR couplers): developing grains hold back development a few micrometres around them, so edges between light and dark get crisper and colours separate more. Not a digital sharpen. 1 = spektrafilm's physical model. 0 = off. | 0 to 2 | 1 |
Shot digital. Printed on film.
Try every feature free for 14 days. No card needed.